High Torque Automotive Electric BLDC Motor-W4241

High Torque Automotive Electric BLDC Motor-W4241

This W42 series brushless DC motor applied rigid working circumstances in automotive control and commercial use application. Compact feature widely used in automotive fields.

product details

Product Tags

Production introduction

Brushless DC motor technology offer several advantages including high torque to weight ratio, increased efficiency and reliability, reduced noise and longer lifetime compared to brushed DC motors. Retek motion offers a wide variety of high quality BLDC motors technologies such as Slotted, Flat and low voltage motors in sizes from 28 to 90mm diameter. Our brushless DC motors offer high torque density and high volume capabilities and all of our models can be customized to fulfill your specific requirements.

General Specification

● Voltage Range: 12VDC, 24VDC, 36VDC, 48VDC.
● Output Power: 15~150 watts.
● Duty: S1, S2.
● Speed Range: 1000 to 6,000 rpm.
● Operational Temperature: -20°C to +40°C.
● Insulation Grade: Class B, Class F.

● Bearing Type: SKF, NSK bearings.
● Shaft materials: #45 Steel, Stainless Steel, Cr40.
● Optional housing surface treatment: Powder Coated, Painting.
● Housing Type: IP67,IP68.
● RoHS and Reach Compliant.

Application

TABLE CNC MACHINES, CUTTING MACHINES, DISPENSERS, PRINTERS, PAPER COUNTING MACHINES, ATM MACHINES AND ETC.

Dimension

Typical Performance

Items	Unit	Model
Items	Unit	W4241	W4261	W4281	W42100
Number Of Phase	Phase	3
Number of Poles	Poles	8
Rated Voltage	VDC	24
Rated Speed	RPM	4000
Rated Torque	N.m	0.0625	0.125	0.185	0.25
Rated Current	AMPs	1.8	3.3	4.8	6.3
Rated Power	W	26	52.5	77.5	105
Peak Torque	N.m	0.19	0.38	0.56	0.75
Peak Current	AMPs	5.4	10.6	15.5	20
Back E.M.F	V/Krpm	4.1	4.2	4.3	4.3
Torque Constant	N.m/A	0.039	0.04	0.041	0.041
Rotor Interia	g.cm²	24	48	72	96
Body Length	mm	41	61	81	100
Weight	kg	0.3	0.45	0.65	0.8
Sensor	Honeywell
Insulation Class	B
Degree of Protection	IP30
Storage Temperature	-25~+70℃
Operating Temperature	-15~+50℃
Working Humidity	<85%RH
Working Environment	No direct sunlight, non-corrosive gas,oil mist, no dust
Altitude	<1000m

Typical Curve

FAQ

1. What are your prices?

Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
2. Do you have a minimum order quantity?

Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
3. Can you supply the relevant documentation?

Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4. What is the average lead time?

For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5. What kinds of payment methods do you accept?

You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.