Outer rotor motor-W4215
Production introduction
The outer rotor motor has higher efficiency than the traditional motor, can more effectively convert electrical energy into mechanical energy, and reach a 90% conversion rate, its high torque is also larger than the traditional motor, can achieve fast start and reach the rated speed which meet the high requirements of the body parts of industrial robots and is very suitable for high load continuous operation applications. In addition, the outer rotor motor has no brush, which reduces the possibility of failure during operation, and the low noise can also be better applied to noise sensitive occasions. In addition, given the flexible design of the outer rotor motor, it can be compatible with various machine finger structures and control systems, providing users with more convenience and choice. Outer rotor motors play an important role in both automated production equipment and robotic research and development.
General Specification
●Rated Voltage: 24VDC
●Motor Steering: Double steering(axle extension)
●Motor Withstand Voltage Test: ADC 600V/3mA/1Sec
●Speed Ratio: 10:1
●No-load Performance: 144±10%RPM/0.6A±10%
Load Performance: 120±10%RPM/1.55A±10%/2.0N.m
●Vibration: ≤7m/s
●Empty Position: 0.2-0.01mm
●Insulation Class: F
●IP Level: IP43
Application
AGV, Hotel Robots, Underwater Robots and etc
Dimension
Parameters
|
Items |
Unit |
Model |
|
W4215 |
||
|
Rated voltage |
V |
24(DC) |
|
Rated speed |
RPM |
120-144 |
|
Motor steering |
/ |
Double steering |
|
Noise |
dB/1m |
≤60 |
|
Speed Ratio |
/ |
10:1 |
|
Empty Position |
mm |
0.2-0.01 |
|
Vibration |
m/s |
≤7 |
|
Insulation Class |
/ |
F |
|
IP Class |
/ |
IP43 |
FAQ
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.
