Good quality Brushless Motor And Esc - High Torque Automotive Electric BLDC Motor-W4241 – Retek
Good quality Brushless Motor And Esc - High Torque Automotive Electric BLDC Motor-W4241 – Retek Detail:
Product Introduction
Brushless DC motor technology offer several advantages including high torque to weight ratio, increased efficiency and reliability, reduced noise and longer lifetime compared to brushed DC motors. Retek motion offers a wide variety of high quality BLDC motors technologies such as Slotted, Flat and low voltage motors in sizes from 28 to 90mm diameter. Our brushless DC motors offer high torque density and high volume capabilities and all of our models can be customized to fulfill your specific requirements.
General Specification
● Voltage Range: 12VDC, 24VDC, 36VDC, 48VDC.
● Output Power: 15~150 watts.
● Duty: S1, S2.
● Speed Range: 1000 to 6,000 rpm.
● Operational Temperature: -20°C to +40°C.
● Insulation Grade: Class B, Class F.
● Bearing Type: SKF, NSK bearings.
● Shaft materials: #45 Steel, Stainless Steel, Cr40.
● Optional housing surface treatment: Powder Coated, Painting.
● Housing Type: IP67,IP68.
● RoHS and Reach Compliant.
Application
TABLE CNC MACHINES, CUTTING MACHINES, DISPENSERS, PRINTERS, PAPER COUNTING MACHINES, ATM MACHINES AND ETC.
Dimension
Typical Performance
|
Items |
Unit |
Model |
|||
|
W4241 |
W4261 |
W4281 |
W42100 |
||
|
Number Of Phase |
Phase |
3 |
|||
|
Number of Poles |
Poles |
8 |
|||
|
Rated Voltage |
VDC |
24 |
|||
|
Rated Speed |
RPM |
4000 |
|||
|
Rated Torque |
N.m |
0.0625 |
0.125 |
0.185 |
0.25 |
|
Rated Current |
AMPs |
1.8 |
3.3 |
4.8 |
6.3 |
|
Rated Power |
W |
26 |
52.5 |
77.5 |
105 |
|
Peak Torque |
N.m |
0.19 |
0.38 |
0.56 |
0.75 |
|
Peak Current |
AMPs |
5.4 |
10.6 |
15.5 |
20 |
|
Back E.M.F |
V/Krpm |
4.1 |
4.2 |
4.3 |
4.3 |
|
Torque Constant |
N.m/A |
0.039 |
0.04 |
0.041 |
0.041 |
|
Rotor Interia |
g.cm2 |
24 |
48 |
72 |
96 |
|
Body Length |
mm |
41 |
61 |
81 |
100 |
|
Weight |
kg |
0.3 |
0.45 |
0.65 |
0.8 |
|
Sensor |
Honeywell |
||||
|
Insulation Class |
B |
||||
|
Degree of Protection |
IP30 |
||||
|
Storage Temperature |
-25~+70℃ |
||||
|
Operating Temperature |
-15~+50℃ |
||||
|
Working Humidity |
<85%RH |
||||
|
Working Environment |
No direct sunlight, non-corrosive gas,oil mist, no dust |
||||
|
Altitude |
<1000m |
||||
Typical Curve
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
2. Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
3. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4. What is the average lead time?
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5. What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.
Product detail pictures:
Related Product Guide:
We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Good quality Brushless Motor And Esc - High Torque Automotive Electric BLDC Motor-W4241 – Retek , The product will supply to all over the world, such as: Macedonia, Barbados, Ireland, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Phyllis from Munich - 2017.06.19 13:51
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Margaret from Honduras - 2018.12.11 14:13
