Economical BLDC Motor W80155 - High Performance 80mm Brushless DC Motors from China Suppliers & Factory
Production Introduction
This brushless fan motor is designed for air ventilators and fans, its housing is made by metal sheet with air vented feature and can be used under DC power source or AC power source as well connected with AirVent integrated controller.
General Specification
- ✔ Voltage Range: 12VDC, 48VDC / 230VAC
- ✔ Output Power: 15~100 watts
- ✔ Duty: S1
- ✔ Speed Range: up to 4,000 rpm
- ✔ Operational Temperature: -20°C to +40°C
- ✔ Insulation Grade: Class B, Class F
- ✔ Bearing Type: sleeve bearings, ball bearings optional
- ✔ Optional Shaft Material: #45 Steel, Stainless Steel
- ✔ Housing Type: Air Ventilated, Metal Sheet, Aluminum Housing IP68
- ✔ Rotor Feature: Inner rotor brushless motor
Application
Blowers, air ventilators, HVAC, air coolers, standing fans, bracket fans and air purifiers and etc.
Dimension
Typical Performances
| Items | Unit | Model W80155 |
|---|---|---|
| Number Of Phase | Phase | 3 |
| Rated Voltage | VAC | 230 |
| No-load Speed | RPM | 3500REF |
| No-load Current | AMPs | 0.2REF |
| Rated Speed | RPM | 1400 |
| Rated Power | W | 215 |
| Rated Torque | N.m | 1.45 |
| Rated Current | AMPs | 1 |
| Insulating Strength | VAC | 1500 |
| IP Class | - | IP55 |
| Insulation Class | - | B |
| Body Length | mm | 155 |
| Weight | kg | 2.3 |
Typical Curve @230VAC
Frequently Asked Questions
1. What are your prices?
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
2. Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
3. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4. What is the average lead time?
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5. What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.