Durable D78 Series Brushed DC Motor - Reliable China Suppliers & Factory for Power Tools
Production Introduction
⚡
This product is a compact high efficient brushed DC motor. The magnet ingredient consists of NdFeB (Neodymium Ferrum Boron), which greatly enhances efficiency compared to other motors available in the market.
🔧
The motor adopts a skewed slots design which greatly improves electromagnetic noise performance.
🏥
By using bonded epoxy, the motor can be used in very harsh circumstances with severe vibration such as ambulance ventilator pumps, suction pumps, and more — especially in the medical field.
🛡️
We also provide the service to add shield fabric wrapped around the motors and capacitors to ensure they fulfill high-standard working conditions meeting EMI and EMC requirements.
💧
It is also durable for harsh vibration working conditions with S1 working duty, stainless steel shaft, anodizing surface treatment, 1000 hours long life requirement, and IP68 grade if necessary.
General Specification
- Voltage Range: 12VDC, 24VDC, 130VDC, 162VDC
- Output Power: 45~250 watts
- Duty: S1, S2
- Speed Range: up to 9,000 rpm
- Operational Temperature: -20°C to +40°C
- Insulation Grade: Class B, Class F, Class H
- Bearing Type: durable brand ball bearings
- Optional shaft material: #45 Steel, Stainless Steel, Cr40
- Optional housing surface treatment: Powder Coated, Electroplating, Anodizing
- Housing Type: Air Ventilated, Water Proof IP68
- Slot Feature: Skew Slots, Straight Slots
- EMC/EMI Performance: pass all EMC and EMI testing
- Certification: CE, ETL, CAS, UL
Application
Power tool, window openers, diaphragm pump, clay trap, electric vehicle, golf cart, hoist, winches, ice augers, spreaders, cultivators, sewage pump
Dimension
Typical Performances
| Items | Unit | Model |
|---|---|---|
| D78141A-12 | ||
| Rated voltage | V | 12 |
| No-load speed | RPM | 9176 |
| No-load current | A | 21.46 |
| Load speed | RPM | 4798 |
| Load current | A | 258.87 |
| Output power | W | 1675.9 |
Typical Curve @90VDC
FAQ
-
1. What are your prices?Our prices are subject to specification depending on technical requirements. We will make an offer once we clearly understand your working condition and technical requirements.
-
2. Do you have a minimum order quantity?Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000 PCS; however, we also accept custom-made orders with smaller quantities at a higher expense.
-
3. Can you supply the relevant documentation?Yes, we can provide most documentation including Certificates of Analysis / Conformance, Insurance, Origin, and other export documents where required.
-
4. What is the average lead time?For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. Lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. In most cases we are able to accommodate your deadline needs.
-
5. What kinds of payment methods do you accept?You can make payment to our bank account, Western Union, or PayPal: 30% deposit in advance, 70% balance before shipment.
-
6. Can the motor be customized for specific application requirements?Yes, we offer full customization services including shaft material selection, housing surface treatment, insulation grade, slot design, IP rating, and EMI/EMC shielding to meet your specific application and working environment requirements.